Indicial response function for finite-thickness airfoils, a semi-empirical approach
Mac Gaunaa, Leonardo Bergami and Joachim Heinz
DTU Wind Energy
Presented at 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 2011, Orlando, Florida
DTU Orbit
Feasibility of Aerodynamic Flap Hinge Moment Measurements as Input for Load Alleviation Control
Tim Behrens, Wei Jun Zhu
Vestas Wind Systems A/S, DTU Wind Energy
Presented at European Wind Energy Conference and Exhibition, 2011
A near wake model for deformable trailing edge flaps implemented the in multi body aero-servo-elastic code HAWC2
Peter Bjørn Andersen, Helge Aagaard Madsen, Mac Gaunaa
DTU Wind Energy
Presented at European Wind Energy Conference and Exhibition, 2010, Poland
DTU Orbit
Brian Resor, David Wilson, Dale Berg, Jonathan Berg, Thanasis Barlas, Jan-Willem van Wingerden, and Gijs van Kuik
Sandia National Laboratories, Delft University of Technology
Presented at 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010, Orlando, Florida
Active Aerodynamic Blade Distributed Flap Control Design Procedure for Load Reduction on the UpWind 5MW Wind Turbine
David G. Wilson, Brian R. Resor, Dale E. Berg, Thanasis K. Barlas, Gijs A.M. van Kuik
Sandia National Laboratories, Delft University of Technology
48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010, Orlando, Florida
DTU Orbit
Active aerodynamic control of wind turbine blades with high deflection flexible flaps
Georgios K. Pechlivanoglou,Jurgen Wagner, C.N. Nayeriz, C.O. Paschereit
Technische Universitat Berlin
Presented at 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010, Orlando, Florida
Design of a wind tunnel scale model of an adaptive wind turbine blade for active aerodynamic load control experiments
Anton W. Hulskamp, Adriaan Beukers, Harald E.N. Bersee, Jan Willem van Wingerden and Thanasis Barlas
Delft University of Technology
Presented at 16th International Conference on Composite Materials, 2010, Japan
DTU Orbit
Design and manufacturing of a morphing flap for wind turbine blades
Peter Bjoern Andersen, Helge Aagard Madsen, Tom Løgstrup Andersen, Thomas Schettler, DTU Wind Energy
A Model Based Control methodology combining Blade Pitch and Adaptive Trailing Edge Flaps in a common framework
L. C. Henriksen, L. Bergami, P. B. Andersen, DTU Wind Energy
Towards an industrial manufactured morphing trailing edge flap system for wind turbines
H.Aa. Madsen, T.L. Andersen, L. Bergami, J.E. Jørgensen, DTU Wind Energy
A. Candela Garolera, J. Holbøll, DTU Electrical Engineering
T. Schettler, P. Michels, M. Schoebel, M. Heisterberg, Rehau, Denmark
M.B. Christensen, Hydratech Industries, Denmark
The potentials of the controllable rubber trailing edge flap (CRTEF)
Helge Aa. Madsen, Peter B. Andersen, Tom L. Andersen, Christian Bak, Thomas Buhl, DTU Wind Energy
Fatigue Load Reduction Potential with deformable rubber trailing edge flaps
Andreas Fischer, Peter Bjørn Andersen, Leonardo Bergami and Helge Aagaard Madsen, DTU Wind Energy
Simulations of a rotor with active deformable trailing edge flaps in half-wake inflow: Comparison of EllipSys 3D with HAWC2
Thanasis Barlas, Frederik Zahle, Niels N. Sørensen, Mac Gaunaa, and Leonardo Bergami, DTU Wind Energy
Simulations of a rotor with active deformable trailing edge flaps in half-wake inflow: Comparison of EllipSys 3D with HAWC2, version 2
Thanasis Barlas, Frederik Zahle, Niels N. Sørensen, Mac Gaunaa, and Leonardo Bergami, DTU Wind Energy
Influence of actuator dynamics on the load reduction potential of wind turbines with distributed controllable rubber trailing edge flaps (CRTEF)
Thanasis K. Barlas, Helge A. Madsen, DTU Wind Energy
Load Alleviation Potential with Trailing Edge Flaps for Turbines in Wake Operation
Andreas Fischer, Helge Aagaard Madsen, DTU Wind Energy